- Category : 1.Turning / drilling / tapping / milling -TAP Wrench,Dies,Tap
- Brand : CHUOKU
- Product Code : -
Tap, Die Tap, Tap Handle (Included) CHUOKU
Tapping is a device for making internal threads using taps or male threads (TAP), divided into the following types:
1. Tap the machine Threaded straight PO / threaded thread SP (Click to view products)
2. Tap 3 pieces/set (Click to view products)
3. Tap NPT threaded straight pipe, taper (Click to view products)
4. Tap threaded straight pipe BSP/Thread pipe taper BSPT (Click to view products)
5. Tap the left screw machine SP-LH (mm.) (Click to view products)
Tap the left-hand thread machine SP-LH (inch ) (Click to view products)
6.HSS left-hand thread (3) (Click to view products)
7.Thread rolling tap HSS CO.5 (no drilling required) (Click to view products)
8.Machine Tap Co5 BSPT-SP /UNF-SP (Click to view products)
9.Machine tap, right-hand thread, SP (Click to view products)
Dies, die taps, external threads using dies or female threads (DIE)
1.Die-Tap, Left-hand Thread CHUOKU (Click to view products)
2.Die-Tap,BSW CHUOKU (Click to view products))
3.Die-Tap NPT CHUOKU (Click to view products)
4.Die-Tap UNF CHUOKU (Click to view products)
Tapping method
Internal threading is classified as a cutting tool. This is because the thread is cut inside the hole of the workpiece that has been pre-drilled according to the size and standard. which tapping work is divided into 2 methods
1. Hand tapping, HAND TAPPING, with the following equipment
1.1 Taps are divided into 3 types as follows:
Type 1 is TAPER TAP - it has a taper tip of approximately 8-10 threads which is suitable for thread cutting in very hard materials. but not suitable for non-through tapping
Type 2 is PLUG TAP - It has less taper tip than TAPER TAP which is 5-10 threads long, suitable for through hole work.
Type 3 is Bottoming Tap - has a slightly tapered tip. which is about 1-1.5 threads long only Suitable for holes that have been tapped with other pilot taps. Suitable for both through-hole and non-through-hole applications.
2. Tapping with a machine
For more information 02-744-3871-5 ext.102-105 FAX 02-748-5058
ID LINE : @BOWMAP Website : http://www.bowmap.com/th