Welding Set ,Electric Holder,Tungsten Wire
ยี่ห้อ โบแมพ (BOWMAP)
Contact us

Electric Holder

Electric Holder Used for holding wires because the use of electric welding machines, the handle will connect the electric wires to the electric welding machine. The good welding vise must be light weight, good heat dissipation, and must be insulated to prevent both heat. and leakage current as well

ชุดเชื่อม,คีมอ๊อก,ลวดเชื่อมสเตนเลส

 

 

Ground Clamp

Ground Clamp It is a device that is connected from an electric welding machine. by holding a good ground wire The pliers must be tight and do not easily melt or come off the workpiece. Due to the forged ground wire clamping, an arc will be generated between the clamp and the workpiece. and is a conductor that has enough current to flow through

ชุดเชื่อม,คีมอ๊อก,ลวดเชื่อมสเตนเลส

 

Tungsten welding wire

It is a tungsten wire suitable for TIG machines by using ARGON gas as a melt to attach to the workpiece with properties containing not less than 97.30% tungsten. Tungsten is a hard metal. Ultimate tensile strength as well as good corrosion resistance and pressure resistance. It also combines with modern technology, making the welding work faster, slower, and the welds come out beautiful.

Click to see products >> welding wire

ลวดเชื่อม ทังสเตนลวดเชื่อม ทังสเตน

 

A.C welding set

Welding kit for oxygen tank It is a termination device which is attached to a welding torch which is a pipe through which the gas is mixed and then melts the metals together by either electric or gas welding. But there will be differences in that gas welding Will use a gas cutting set to spray gas to heat the welding wire until it melts together with the desired metal. which the commonly used gas is acetylene gas with oxygen which these gases will be compressed into the storage tank

Click to see products >>AC welding

ชุดเชื่อม,คีมอ๊อก,ลวดเชื่อมสเตนเลส

 

LPG welding set

welding kit for gas tank It is an end fitting which is attached to a welding torch that is a pipe through which the gas is mixed. The process of melting the metals together by electric or gas welding. But there will be differences in that gas welding Will use a gas cutting set to spray gas to heat the welding wire until it melts together with the desired metal. which the commonly used gas is acetylene gas with oxygen which these gases will be compressed finished.

ชุดเชื่อม,คีมอ๊อก,ลวดเชื่อมสเตนเลส

Click to see products >>AC welding

 

For more information,TEL 02-744-3871-5  ต่อ102-105  FAX 02-748-5058

ID LINE : @BOWMAP    Website : http://www.bowmap.com/th

ปิดปรับปรุงระบบความคิดเห็นชั่วคราว ขออภัยในความไม่สะดวก หากลูกค้าต้องการเปิดใช้งานระบบ กรุณาติดต่อ 02-8323222 กด 2