Turning / drilling / tapping / milling
Cast Iron Drill bit 1-5/16
4,200.00 THB
4,800.00 THB
Drill bits 1-5/16 or DRILL (Drill, Cast Iron) is a drill bit used for drilling metal work, steel, masonry according to each type
How to use a drill bit, 1-5/16 drill bits after pilot drilling with the center bit.You should choose two types of drill bits: 1. Straight shank drill bits. 2. Tapered shank drill bit
In the case of a tapered shan...
Tap Wrench
Tap Wrench (Hand tool)
A tap wrench is a hand tool used to hold taps for threading.
Types of Tap Wrench
1. Two double-end adjustable tap wrenches (bar wrenches),There are one threaded handle which is attached to one of the clamps. The clamp is opened to insert the Taps and then tightened down a...
Lathe Chucks お勧め!
Product Code : BINACHO
4 JAW / 3 JAW Lathe Chucks
Lathe chucks are equipment that it's in Headstock. Lathe chucks use for holding the lathe.And,there are 3 types.
1.Lathe chucks three-JAW Self centering - It can handle hex bar-stock.
2.Lathe chucks four-JAW Independent lathe - It can handle square/rectangular bar.
3.Lat...
Tap, Die Tap, Tap Handle (Included)
Tap, Die Tap, Tap Handle (Included) CHUOKU
Tapping is a device for making internal threads using taps or male threads (TAP), divided into the following types:
1. Tap the machine Threaded straight PO / threaded thread SP (Click to view products)
2. Tap 3 pieces/set (Click to view products)
3. Tap NPT threaded straight pipe, taper&...
Tool bits 2500 Special size
Tool bits 2500 Special sizeis a device used to cut the work into the desired shape Because the properties of turning knives are tough, they are resistant to cracking and have high heat resistance. Its main ingredient is iron.
The angle of the lathe knife consists of 3 angles as follows:
1. Rake Angles - which will have both rear and front rake...
Tool bits Grade 1900,2500,Co.8
Tool bits Grade 1900,2500,Co.8
is a device used to cut the work into the desired shape Because the properties of Tool bits are tough, they are resistant to cracking and have high heat resistance. Its main ingredient is iron.
There are 3 types of commonly used turning knives.
1. CHUOKU round Tool bits
2. ...
CARBIDE TIP U20C,H03C,K20,P20
CARBIDE TIP is a knife device that has different shapes according to the user. which is used to cut the workpiece according to the shape that the user wants
Types of nail knife grades are as follows:
1.CARBIDE TIP K20 CHUOKU
2.CARBIDE TIP P20 CHUOKU
3.CARBIDE TIP U20C CHUOKU
4.CARBIDE T...
Live center
Live center CHUOKU
has another name center of the platform which is a device for supporting the workpiece with a length to rotate the center, not swinging, which is divided into 2 types: 1. The center is lean 2. Zero death model which the body style of the center lean is standard Morse No.3 to fit into the internal tapered hole of the ce...
End Mill (all kinds)
Product Code : ENDMILL
CHUOKU ENDMILL
Optimized for adjustments that will rotate the work in a hurry... Customize as you like .
Divided by clips according to the following types:
1. HSS 4F end mill = Click to see >>ENDMILL HSS 4F
2. SUPER HSS 4F end mill = Click to see>> ENDMILL SUPER HSS 4F
3. Rough milling end mill 4F HSS = Click to se...
CENTER DRILL
CENTER DRILL
is a hole punched workpiece for inserting the center However, it can also be used for milling depending on the nature of the workpiece. The center drill is a pilot drill to perform a step-by-step work on the other workpiece. which before drilling the center The workpiece must be secured and strong first so that during drilling o...
COLLETS ER40
COLLETS ER40 Europe, size 4 MM.-26 MM.
Collet chucks are suitable for holding high precision applications. which will have a job handle type as follows
1. Collet for holding square work.
2. Collet for holding hexagons
The collet chuck is made of steel and is heat treated with dimensions specified on the collet chuck body. Usually when hold...
COLLETS ER32
COLLETS ER32 (คอลเลต)
COLLETS ER 32 Size 3 MM.-20 MM.
For more information 02-744-3871-5 ต่อ102-105 FAX 02-748-5058
ID LINE : @BOWMAP Website : http://www.bowmap.com/th
Cast Iron Drill bit 1-5/16
4,200.00 THB
4,800.00 THB
Drill bits 1-5/16 or DRILL (Drill, Cast Iron) is a drill bit used for drilling metal work, steel, masonry according to each type
How to use a drill bit, 1-5/16 drill bits after pilot drilling with the center bit.You should choose two types of drill bits: 1. Straight shank drill bits. 2. Tapered shank drill bit
In the case of a tapered shan...
Tap Wrench
Tap Wrench (Hand tool)
A tap wrench is a hand tool used to hold taps for threading.
Types of Tap Wrench
1. Two double-end adjustable tap wrenches (bar wrenches),There are one threaded handle which is attached to one of the clamps. The clamp is opened to insert the Taps and then tightened down a...
Lathe Chucks お勧め!
Product Code : BINACHO
4 JAW / 3 JAW Lathe Chucks
Lathe chucks are equipment that it's in Headstock. Lathe chucks use for holding the lathe.And,there are 3 types.
1.Lathe chucks three-JAW Self centering - It can handle hex bar-stock.
2.Lathe chucks four-JAW Independent lathe - It can handle square/rectangular bar.
3.Lat...
Tap, Die Tap, Tap Handle (Included)
Tap, Die Tap, Tap Handle (Included) CHUOKU
Tapping is a device for making internal threads using taps or male threads (TAP), divided into the following types:
1. Tap the machine Threaded straight PO / threaded thread SP (Click to view products)
2. Tap 3 pieces/set (Click to view products)
3. Tap NPT threaded straight pipe, taper&...
Tool bits 2500 Special size
Tool bits 2500 Special sizeis a device used to cut the work into the desired shape Because the properties of turning knives are tough, they are resistant to cracking and have high heat resistance. Its main ingredient is iron.
The angle of the lathe knife consists of 3 angles as follows:
1. Rake Angles - which will have both rear and front rake...
Tool bits Grade 1900,2500,Co.8
Tool bits Grade 1900,2500,Co.8
is a device used to cut the work into the desired shape Because the properties of Tool bits are tough, they are resistant to cracking and have high heat resistance. Its main ingredient is iron.
There are 3 types of commonly used turning knives.
1. CHUOKU round Tool bits
2. ...
CARBIDE TIP U20C,H03C,K20,P20
CARBIDE TIP is a knife device that has different shapes according to the user. which is used to cut the workpiece according to the shape that the user wants
Types of nail knife grades are as follows:
1.CARBIDE TIP K20 CHUOKU
2.CARBIDE TIP P20 CHUOKU
3.CARBIDE TIP U20C CHUOKU
4.CARBIDE T...
Live center
Live center CHUOKU
has another name center of the platform which is a device for supporting the workpiece with a length to rotate the center, not swinging, which is divided into 2 types: 1. The center is lean 2. Zero death model which the body style of the center lean is standard Morse No.3 to fit into the internal tapered hole of the ce...
End Mill (all kinds)
Product Code : ENDMILL
CHUOKU ENDMILL
Optimized for adjustments that will rotate the work in a hurry... Customize as you like .
Divided by clips according to the following types:
1. HSS 4F end mill = Click to see >>ENDMILL HSS 4F
2. SUPER HSS 4F end mill = Click to see>> ENDMILL SUPER HSS 4F
3. Rough milling end mill 4F HSS = Click to se...
CENTER DRILL
CENTER DRILL
is a hole punched workpiece for inserting the center However, it can also be used for milling depending on the nature of the workpiece. The center drill is a pilot drill to perform a step-by-step work on the other workpiece. which before drilling the center The workpiece must be secured and strong first so that during drilling o...
COLLETS ER40
COLLETS ER40 Europe, size 4 MM.-26 MM.
Collet chucks are suitable for holding high precision applications. which will have a job handle type as follows
1. Collet for holding square work.
2. Collet for holding hexagons
The collet chuck is made of steel and is heat treated with dimensions specified on the collet chuck body. Usually when hold...
COLLETS ER32
COLLETS ER32 (คอลเลต)
COLLETS ER 32 Size 3 MM.-20 MM.
For more information 02-744-3871-5 ต่อ102-105 FAX 02-748-5058
ID LINE : @BOWMAP Website : http://www.bowmap.com/th